Latest revision |
Your text |
Line 1: |
Line 1: |
| == Important Foreword == | | == Important Foreward == |
| If you run into trouble or have a question, you can make inquiries in the #server-help channel in the {{Eco Discord}} | | First, a disclaimer: [[Strange Loop Games]] does provide a Linux server build, but they do not offer official support for it at this time. It is provided as a convenience, not a product. |
| | |
| | If you run into trouble or have a question, you can make inquiries in the #server-help channel in the [https://discord.gg/eco Eco Discord], but keep in mind the information above. |
| == Prerequisites == | | == Prerequisites == |
| EcoServer is compiled natively for Linux but requires some packages.
| | === Mono No More === |
| | | Prior to version 9.0 of Eco, it was required that you run with a very old build (no later than 5.14) of the Mono development libraries, and use Mono to run the server. This is no longer the case. |
| To install the required packages for Linux, use:<syntaxhighlight lang="bash">
| | === .NET Core Libraries === |
| ./install.sh | | Eco is now built with and is run leveraging [https://docs.microsoft.com/en-us/dotnet/core .NET Core], and runs as a native binary on Linux. You will have to [https://docs.microsoft.com/en-us/dotnet/core/install/linux install the .NET Core 3.1 libraries], repositories for which Microsoft makes available for several Linux distributions. Follow the directions on Microsoft's site for instructions for installing the libraries. |
| </syntaxhighlight>This will install the following packages:
| |
| * [https://www.mono-project.com/docs/gui/libgdiplus/ libgdiplus]
| |
| | |
| * [https://www.gnu.org/software/libc/libc.html libc6-dev]
| |
| == Eco Dedicated Server files == | | == Eco Dedicated Server files == |
| There are two primary options for acquisition of the Eco dedicated server: getting it directly from Strange Loop Games, or through Valve Software's Steam platform. | | There are two primary options for acquisition of the Eco dedicated server: getting it directly from Strange Loop Games, or through Valve Software's Steam platform. |
Line 19: |
Line 17: |
| <syntaxhighlight lang="sh"> | | <syntaxhighlight lang="sh"> |
| #!/bin/bash | | #!/bin/bash |
| steamcmd +force_install_dir ~/Eco +login anonymous +app_update 739590 -beta default validate +quit | | steamcmd +login anonymous +force_install_dir ~/Eco +app_update 739590 -beta default validate +quit |
| </syntaxhighlight> | | </syntaxhighlight> |
| === SLG Direct Download === | | === SLG Direct Download === |
| An archive of the current release of the Eco Dedicated Server as of this writing (Beta 9.4.1) can be found [https://play.eco/ here]. The following series of commands will download the archive, and set the Eco Dedicated Server up in an <tt>Eco</tt> subdirectory of your home directory, and save a copy of the install archive into a <tt>dist</tt> subdirectory of your home directory: | | An archive of the current release of the Eco Dedicated Server as of this writing (Beta 9.1.6) can be found [https://s3-us-west-2.amazonaws.com/eco-releases/EcoServerLinux_v0.9.1.6-beta.zip here]. The following series of commands will download the archive, and set the Eco Dedicated Server up in an <tt>Eco</tt> subdirectory of your home directory, and save a copy of the install archive into a <tt>dist</tt> subdirectory of your home directory: |
| <syntaxhighlight lang="sh"> | | <syntaxhighlight lang="sh"> |
| mkdir -p ~/Eco | | mkdir -p ~/Eco |
| cd ~/Eco | | cd ~/Eco |
| wget https://play.eco/s3/release/EcoServerLinux_v0.9.4.1-beta.zip | | wget https://s3-us-west-2.amazonaws.com/eco-releases/EcoServerLinux_v0.9.1.9-beta.zip |
| unzip EcoServerLinux_v0.9.4.1-beta.zip | | unzip EcoServerLinux_v0.9.1.9-beta.zip |
| mkdir -p ~/dist | | mkdir -p ~/dist |
| mv EcoServerLinux_v0.9.4.1-beta.zip ~/dist/ | | mv EcoServerLinux_v0.9.1.9-beta.zip ~/dist/ |
| </syntaxhighlight> | | </syntaxhighlight> |
| | |
| == Setting up the network == | | == Setting up the network == |
| === Setting up firewalld on your server === | | |
| | === Setting up the firewall on your server === |
| <syntaxhighlight lang="bash"> | | <syntaxhighlight lang="bash"> |
| firewall-cmd --zone=public --add-port=3000/tcp --permanent | | firewall-cmd --zone=public --add-port=2999/tcp --permanent |
| firewall-cmd --zone=public --add-port=3000/udp --permanent | | firewall-cmd --zone=public --add-port=3000/udp --permanent |
| firewall-cmd --zone=public --add-port=3001/tcp --permanent | | firewall-cmd --zone=public --add-port=3001/tcp --permanent |
Line 40: |
Line 40: |
| systemctl restart firewalld | | systemctl restart firewalld |
| </syntaxhighlight> | | </syntaxhighlight> |
| === Forwarding your router ports ===
| |
| To give other people access to your server you need to tell your router how to handle incoming request from certain ports that come from an external computer.
| |
|
| |
|
| On an Asus router you can find these settings under Wan -> Virtual Server / Port Forwarding. ( I censored my own setup to keep my server secure but this should give some idea). First of all you need to set a name (Service name). The next item is the port range, on my router I would write 3000:3001 to give it the right range. Next item is the local IP - this should be your server IP. Leave the local port blank.
| |
| == Starting the Server == | | == Starting the Server == |
| Because the Eco Dedicated Server is now a native Linux binary, starting it could not be easier. Again, presuming it is installed in an <tt>Eco</tt> subdirectory of your home: | | Because the Eco Dedicated Server is now a native Linux binary, starting it could not be easier. Again, presuming it is installed in an <tt>Eco</tt> subdirectory of your home: |
Line 50: |
Line 47: |
| ./EcoServer | | ./EcoServer |
| </syntaxhighlight> | | </syntaxhighlight> |
| == Systemd service script ==
| | == Stopping the Server == |
| You can choose to create the service either system-wide OR as a user based service. The latter you CAN do without root but if you can't sudo/be root to use the loginctl command it won't stay around when you're logged out, and won't start on boot.
| | To safely shut down the Eco server, send SIGINT or press Control+C with the <tt>EcoServer</tt> process interactively to initiate a safe shutdown. |
| | |
| If you've visited this before, note the example service files have been changed to actually cleanly shutdown the Eco server! The prior version of both examples in this Wiki would NOT correctly stop the server.
| |
| | |
| For system-wide setup you can do the following -- using your favorite editor (vi, nano etc.) edit /etc/systemd/system/EcoServer.service or /usr/lib/systemd/system/EcoServer.service (which depends on your platform, generally though /usr/lib/systemd is for installed packages, not local modifications) and paste the following making sure to update User, Group, WorkingDirectory, and ExecStart.
| |
| | |
| WorkingDirectory is going to be the root of your ECO server. If you'd normally start on the command line from /games/Eco then WorkingDirectory should be /games/Eco
| |
| <syntaxhighlight lang="shell">
| |
| [Unit]
| |
| Description=Eco Server
| |
| # The below may or may not work correctly depending on platform, it's important that systemd is asked to start this after networking is online at the very least.
| |
| After=syslog.target network.target nss-lookup.target network-online.target
| |
| | |
| [Service]
| |
| Type=simple
| |
| Restart=on-failure
| |
| RestartSec=5
| |
| StartLimitInterval=60s
| |
| StartLimitBurst=3
| |
| User=ecoserver
| |
| Group=ecoserver
| |
| Environment="DOTNET_BUNDLE_EXTRACT_BASE_DIR=%h/.net"
| |
| WorkingDirectory=/home/ecoserver/Eco_server
| |
| # change to where your steamcmd exists if you want to automatically update on each restart.
| |
| #ExecStartPre=/home/ark/server/steamcmd +login anonymous +force_install_dir /home/ecoserver/Eco_server/ +app_update 739590 +quit
| |
| # ExecStart MUST be a full path! IE starting with /
| |
| ExecStart=/home/ecoserver/Eco_server/EcoServer
| |
| ExecStop=kill -TERM $MAINPID
| |
| [Install]
| |
| WantedBy=multi-user.target
| |
| </syntaxhighlight>
| |
| Then update the systemd service by running the following:<syntaxhighlight lang="shell">
| |
| sudo systemctl daemon-reload
| |
| </syntaxhighlight>Enable the Systemd service:<syntaxhighlight lang="shell">
| |
| sudo systemctl enable EcoServer
| |
| </syntaxhighlight>You can then optionally start, stop and check the status of the server with the following commands respectively:<syntaxhighlight lang="shell" line="1">
| |
| sudo systemctl start EcoServer
| |
| sudo systemctl stop EcoServer
| |
| sudo systemctl status EcoServer
| |
| </syntaxhighlight>
| |
| You can also deploy using a systemd user service which means you won't need root to start/stop/restart. You'll have to remove the User and Group lines from the unit, and if you want it to start on boot you'll need to enable that for the user.
| |
| | |
| As root or a user with sudo access (this step is critical when setting up the service as a user service if you do not want systemd to shut the server down every time you logout!!):
| |
| <syntaxhighlight lang="shell">
| |
| sudo loginctl enable-linger ecoserv
| |
| </syntaxhighlight>
| |
| | |
| User based service unit example:
| |
| | |
| <syntaxhighlight lang="shell">
| |
| [Unit]
| |
| Description=Eco Server
| |
| # The below may or may not work correctly depending on platform, it's important that systemd is asked to start this after networking is online at the very least.
| |
| After=syslog.target network.target nss-lookup.target network-online.target
| |
| | |
| [Service]
| |
| Type=simple
| |
| Restart=on-failure
| |
| RestartSec=5
| |
| StartLimitInterval=60s
| |
| StartLimitBurst=3
| |
| Environment="DOTNET_BUNDLE_EXTRACT_BASE_DIR=%h/.net"
| |
| WorkingDirectory=%h/Eco_server
| |
| # change to where your steamcmd exists if you want to automatically update on each restart.
| |
| #ExecStartPre=/home/ark/server/steamcmd +login anonymous +force_install_dir %h/Eco_server/ +app_update 739590 +quit
| |
| # ExecStart MUST be a full path! IE starting with /
| |
| ExecStart=%h/Eco_server/EcoServer
| |
| ExecStop=kill -TERM $MAINPID
| |
| [Install]
| |
| WantedBy=default.target
| |
| </syntaxhighlight>
| |
| | |
| As the ecoserv user (or whatever user you choose) create the directory for the unit file(s) if it doesn't exist, and place the above unit file within that directory:
| |
| <syntaxhighlight lang="shell">
| |
| # creates the whole path if it doesn't exist
| |
| mkdir -p ~/.config/systemd/user/
| |
| # edit the file here ... ~/.config/systemd/user/EcoServer.service ... or whatever you name it, just as long as it ends in .service
| |
| systemctl --user daemon-reload
| |
| systemctl --user enable EcoServer
| |
| systemctl --user start EcoServer
| |
| </syntaxhighlight>
| |
| Notice the --user flag to systemctl AND not using sudo. In a user service you can not set the User and Group, and the WantedBy target must be default.target so we remove/change those in the service file. As a user service you can also use %h instead of /home/ecoserv (or whatever) to reference the user home directory, systemd will expand that for us.
| |
| | |
| '''Debian/Ubuntu Version'''
| |
| <syntaxhighlight lang="shell">
| |
| [Unit]
| |
| Description=Westwoods Eco
| |
| Wants=network-online.target
| |
| After=syslog.target network.target nss-lookup.target network-online.target
| |
| | |
| [Service]
| |
| Restart=on-failure
| |
| RestartSec=5
| |
| StartLimitInterval=60s
| |
| User=eco
| |
| Group=eco
| |
| LimitNOFILE=100000
| |
| WorkingDirectory=/gameservers/eco
| |
| ExecStartPre=/usr/games/steamcmd +login anonymous +force_install_dir /gamesservers/eco +app_update 739590 default validate +quit
| |
| ExecStart=/gamesservers/eco/EcoServer
| |
| ExecReload=kill -TERM $MAINPID
| |
| ExecStop=kill -TERM $MAINPID
| |
| [Install]
| |
| WantedBy=multi-user.target
| |
| </syntaxhighlight>
| |
| | |
| | |
| ==Stopping the Server== | |
| To safely shut down the Eco server, send SIGTERM (saves world), SIGINT (immediate stop! does not save the world!) or press {{key|Ctrl+C}} with the <tt>EcoServer</tt> process interactively to initiate a safe shutdown. | |
|
| |
|
| Please not that this procedure doesn't work with Eco versions prior to 9.0.0-beta. | | Please not that this procedure doesn't work with Eco versions prior to 9.0.0-beta. |
| ==Docker==
| |
| There is a Docker version of the server as well. You can pull the latest stable version using:
| |
| <syntaxhighlight lang="shell">
| |
| docker pull strangeloopgames/eco-game-server:latest
| |
| </syntaxhighlight>
| |
| You can also find additional builds here:
| |
|
| |
| https://hub.docker.com/r/strangeloopgames/eco-game-server
| |
|
| |
| You will need to make sure that the Docker container is exposing the ports and map them to ports on the host that are open in the hosts firewall and router.
| |
| ==Troubleshooting== | | ==Troubleshooting== |
| ===Missing GDI library=== | | ===Missing GDI library=== |
Line 182: |
Line 61: |
| sudo apt install libgdiplus | | sudo apt install libgdiplus |
| </syntaxhighlight> | | </syntaxhighlight> |
| ===Connecting remotely===
| |
| You may find that your server does not show up in a list for people outside of your local network, even if you have set "PublicServer": true and have opened the appropriate ports in your router (and firewall if enabled on your linux machine).
| |
|
| |
| If this happens, try clicking on the "+" symbol in the "Your Worlds" area, then adding in the external IP and port you used (probably 3000). Unfortunately, https://www.yougetsignal.com/tools/open-ports/ does _not_ accurately reflect one's ability to connect to the server.
| |
|
| |
| [[Category: Server management]]
| |