Редактирование: RCON

== Протокол Eco RCON (Remote Console) ==
Eco RCON это TCP протокол обмена основанный на стандарте RCON. Позволяет использовать команды Администратора Сервера удаленно. Чаще всего RCON используется для того, чтобы владельцы могли управлять серверами, не находясь в игре, для упрощения администрирования или автоматизации процессов.
== Руководство для Владельца/Администратора Сервера ==
=== Использование Eco RCON ===
По умолчанию реализация RCON для Eco прослушивает TCP-порт '''3002'''. Этот параметр можно изменить в параметрах конфигурации сервера, а также указать IP адрес сервера. Для использования RCON необходимо установить пароль в конфигурации сервера. Серверы без пароля отклоняют все входящие запросы аутентификации.

При выполнении команды через ECO RCON вам не нужно использовать косую черту (/), как это требуется делать в чате игры.
Ниже приведен пример удаленного выполнения команды для Бана игрока с использованием инструмента mcrcon, ссылка на который приведена ниже.

[[File:2021-04-30 22-04-51.mp4|800px]]

С списком доступных команд, которые можно использовать с  RCON или в игре, можно изучить [[Команды чата|тут]].
===Общедоступные инструменты и библиотеки===
Большинство стандартных инструментов для стандарта RCON будут работать и с Eco RCON.

'''Инструменты'''
*https://github.com/n0la/rcon (RCON утилита командной строки)
*https://github.com/Tiiffi/mcrcon (RCON клиент командной строки)

Все команды отправленные через RCON выполняются как от Администратора сервера с соответствующим уровнем доступа. 
Не рекомендуется передавать информацию для RCON подключения не проверенным пользователям или программам для доступа к серверу. 

== Руководство Разработчика==
===Установление соединения===
To establish a TCP connection to an Eco RCON server you need to know the server's configured RCON port and the server's configured password and connect via a standard TCP client. Once connected you must authenticate your selves by sending a '''SERVERDATA_AUTH''' packet. Failure to do so will result in no response. If your authentication request was successful you should receive back a '''SERVERDATA_AUTH_RESPONSE''' packet with a matching id of the authentication request packet. Receiving an packet id of -1 means the authentication request has failed. An authentication request can fail if the password is incorrect, misconfigured, or if there is already an active RCON client connection.
===Структура пакета===
==== Basic Packet Structure====
All Eco RCON packets payloads follow this basic structure and are sent over a TCP socket
{| class="wikitable standard-table"
!Field||Тип|||Значение
|-
|Size||32-bit little-endian Signed Integer||Varies, see below.
|-
|ID||32-bit little-endian Signed Integer||Varies, see below.
|-
|Type||32-bit little-endian Signed Integer||Varies, see below.
|-
|Body||Null-terminated ASCII String||Varies, see below.
|-
|Empty String||Null-terminated ASCII String||0x00
|-
|}
====Размер пакета====
The RCON packet size field is represented by a 32-bit little endian integer, It represents the total length of the request in bytes. Note that the '''packet size''' field itself is '''not''' included when determining the size of the packet, so the value of this field is always 4 less than the packet's actual length. The minimum possible value for '''packet size''' is 14.
{| class="wikitable standard-table"
!Size||Containing
|-
|4 Bytes||ID Field
|-
|4 Bytes||Type Field
|-
|At least 1 Byte||Packet body (potentially empty)
|-
|1 Byte||Empty string terminator
|}
====ID пакета====
The packet id field is a 32-bit little endian integer which is specified by the requesting client for each request. Its value can be any positive integer. When the server responds to a client request it will send back the same packet id it received for that command request allowing you match the original request to the server response. 
====Тип пакета====
The packet type field is represented by a 32-bit little endian integer. It the intended purpose of the packet.
{| class="wikitable standard-table"
!Value||String Descriptor
|-
|3||SERVERDATA_AUTH
|-
|2|| SERVERDATA_AUTH_RESPONSE
|-
|2||SERVERDATA_EXECCOMMAND
|-
|0||SERVERDATA_RESPONSE_VALUE
|}
====Тело пакета ====
The packet body field is a null-terminated ASCII encoded string. The contents of the packet body vary by the executed request.
===Типы пакетов====
====='''SERVERDATA_AUTH'''=====
'''SERVERDATA_AUTH''' is the first packet to be sent by a newly connected client. It is used to authenticate with the RCON server and gain access to the '''SERVERDATA_EXECCOMMAND''' request. The values of this packet type's fields are as follows:
{| class="wikitable"
!Field
!Contains
|-
|ID
|any positive integer, chosen by the client (will be mirrored back in the server's response)
|-
|Type
|3
|-
|Body
| the RCON password of the server (If this field matches the password set in the Network configuration the auth request will succeed)
|}
'''Note''': If the password is not properly configured on the server all '''SERVERDATA_AUTH''' requests will be refused.
====='''SERVERDATA_AUTH_RESPONSE'''=====
'''SERVERDATA_AUTH_RESPONSE''' is the response notification packet of a client's '''SERVERDATA_AUTH''' request and contains the results of its authentication attempt. The status is represented by the id of the packet. A -1 value denotes a failed authentication request. If authentication was a success it matches the packet id provided in the original authentication request.
{| class="wikitable"
!Field
! Contains
|-
|ID
|The ID of the original authentication request if it was successful, otherwise -1 on failure.
|-
|Type
|2
|-
|Body
| Empty string (0x00)
|}
====='''SERVERDATA_EXECCOMMAND'''=====
'''SERVERDATA_EXECCOMMAND''' represents a command issued to the server by a client. This can be any valid player or admin command that does not require a physical player in the world to execute. The response will vary depending on the command issued.
{| class="wikitable"
!Field
!Contains
|-
|ID
|any positive integer, chosen by the client (will be mirrored back in the server's response)
|-
|Type
|2
|-
|Body
|the command to be executed on the server
|}
====='''SERVERDATA_RESPONSE_VALUE'''=====
'''SERVERDATA_RESPONSE_VALUE''' is sent when a command had finished executing from a '''SERVERDATA_EXECCOMMAND''' request and contains the chat displayed results of the requested command. 
{| class="wikitable"
!Field
!Contains
|-
|ID
| The ID assigned by the original request
|-
|Type
|0
|-
|Body
|The server's response to the original command.
|}
__NOEDITSECTION__