Server on Linux
Important Foreword[edit | edit source]
First, a disclaimer: Strange Loop Games does provide a Linux server build, but they do not offer official support for it at this time. It is provided as a convenience, not a product.
If you run into trouble or have a question, you can make inquiries in the #server-help channel in the Eco Discord server, but keep in mind the information above.
Prerequisites[edit | edit source]
EcoServer is compiled natively for Linux but requires some packages.
To install the required packages for Linux, use:
This will install the following packages:
Eco Dedicated Server files[edit | edit source]
There are two primary options for acquisition of the Eco dedicated server: getting it directly from Strange Loop Games, or through Valve Software's Steam platform.
Steam Command-Line Client[edit | edit source]
Getting SteamCMD[edit | edit source]
The ECO Dedicated Server is made available through Valve Software's Steam distribution system, and Valve provides a command-line tool called SteamCMD to facilitate command-line installation of products in various environments, including Linux. Follow the directions on the foregoing link to get the SteamCMD program installed and configured on your system. You will not need SteamCMD if you are acquiring the Eco Dedicated Server directly from Strange Loop Games.
Installing Eco with SteamCMD[edit | edit source]
Presuming for the same of simplicity that you wish to install the Eco Dedicated Server into an Eco subdirectory of your home directory, a script such as the following will install and subsequently update the software for you:
#!/bin/bash steamcmd +force_install_dir ~/Eco +login anonymous +app_update 739590 -beta default validate +quit
SLG Direct Download[edit | edit source]
An archive of the current release of the Eco Dedicated Server as of this writing (Beta 9.4.1) can be found here. The following series of commands will download the archive, and set the Eco Dedicated Server up in an Eco subdirectory of your home directory, and save a copy of the install archive into a dist subdirectory of your home directory:
mkdir -p ~/Eco cd ~/Eco wget https://play.eco/s3/release/EcoServerLinux_v0.9.4.1-beta.zip unzip EcoServerLinux_v0.9.4.1-beta.zip mkdir -p ~/dist mv EcoServerLinux_v0.9.4.1-beta.zip ~/dist/
Setting up the network[edit | edit source]
Setting up firewalld on your server[edit | edit source]
firewall-cmd --zone=public --add-port=3000/tcp --permanent firewall-cmd --zone=public --add-port=3000/udp --permanent firewall-cmd --zone=public --add-port=3001/tcp --permanent systemctl restart firewalld
Forwarding your router ports[edit | edit source]
To give other people access to your server you need to tell your router how to handle incoming request from certain ports that come from an external computer.
On an Asus router you can find these settings under Wan -> Virtual Server / Port Forwarding. ( I censored my own setup to keep my server secure but this should give some idea). First of all you need to set a name (Service name). The next item is the port range, on my router I would write 3000:3001 to give it the right range. Next item is the local IP - this should be your server IP. Leave the local port blank.
Starting the Server[edit | edit source]
Because the Eco Dedicated Server is now a native Linux binary, starting it could not be easier. Again, presuming it is installed in an Eco subdirectory of your home:
cd ~/Eco ./EcoServer
Systemd service script[edit | edit source]
You can choose to create the service either system-wide OR as a user based service. The latter you CAN do without root but if you can't sudo/be root to use the loginctl command it won't stay around when you're logged out, and won't start on boot.
If you've visited this before, note the example service files have been changed to actually cleanly shutdown the Eco server! The prior version of both examples in this Wiki would NOT correctly stop the server.
For system-wide setup you can do the following -- using your favorite editor (vi, nano etc.) edit /etc/systemd/system/EcoServer.service or /usr/lib/systemd/system/EcoServer.service (which depends on your platform, generally though /usr/lib/systemd is for installed packages, not local modifications) and paste the following making sure to update User, Group, WorkingDirectory, and ExecStart.
WorkingDirectory is going to be the root of your ECO server. If you'd normally start on the command line from /games/Eco then WorkingDirectory should be /games/Eco
[Unit] Description=Eco Server # The below may or may not work correctly depending on platform, it's important that systemd is asked to start this after networking is online at the very least. After=syslog.target network.target nss-lookup.target network-online.target [Service] Type=simple Restart=on-failure RestartSec=5 StartLimitInterval=60s StartLimitBurst=3 User=ecoserver Group=ecoserver Environment="DOTNET_BUNDLE_EXTRACT_BASE_DIR=%h/.net" WorkingDirectory=/home/ecoserver/Eco_server # change to where your steamcmd exists if you want to automatically update on each restart. #ExecStartPre=/home/ark/server/steamcmd +login anonymous +force_install_dir /home/ecoserver/Eco_server/ +app_update 739590 +quit # ExecStart MUST be a full path! IE starting with / ExecStart=/home/ecoserver/Eco_server/EcoServer ExecStop=kill -TERM $MAINPID [Install] WantedBy=multi-user.target
Then update the systemd service by running the following:
sudo systemctl daemon-reload
Enable the Systemd service:
sudo systemctl enable EcoServer
You can then optionally start, stop and check the status of the server with the following commands respectively:
sudo systemctl start EcoServer sudo systemctl stop EcoServer sudo systemctl status EcoServer
You can also deploy using a systemd user service which means you won't need root to start/stop/restart. You'll have to remove the User and Group lines from the unit, and if you want it to start on boot you'll need to enable that for the user.
As root or a user with sudo access (this step is critical when setting up the service as a user service if you do not want systemd to shut the server down every time you logout!!):
sudo loginctl enable-linger ecoserv
User based service unit example:
[Unit] Description=Eco Server # The below may or may not work correctly depending on platform, it's important that systemd is asked to start this after networking is online at the very least. After=syslog.target network.target nss-lookup.target network-online.target [Service] Type=simple Restart=on-failure RestartSec=5 StartLimitInterval=60s StartLimitBurst=3 Environment="DOTNET_BUNDLE_EXTRACT_BASE_DIR=%h/.net" WorkingDirectory=%h/Eco_server # change to where your steamcmd exists if you want to automatically update on each restart. #ExecStartPre=/home/ark/server/steamcmd +login anonymous +force_install_dir %h/Eco_server/ +app_update 739590 +quit # ExecStart MUST be a full path! IE starting with / ExecStart=%h/Eco_server/EcoServer ExecStop=kill -TERM $MAINPID [Install] WantedBy=default.target
As the ecoserv user (or whatever user you choose) create the directory for the unit file(s) if it doesn't exist, and place the above unit file within that directory:
# creates the whole path if it doesn't exist mkdir -p ~/.config/systemd/user/ # edit the file here ... ~/.config/systemd/user/EcoServer.service ... or whatever you name it, just as long as it ends in .service systemctl --user daemon-reload systemctl --user enable EcoServer systemctl --user start EcoServer
Notice the --user flag to systemctl AND not using sudo. In a user service you can not set the User and Group, and the WantedBy target must be default.target so we remove/change those in the service file. As a user service you can also use %h instead of /home/ecoserv (or whatever) to reference the user home directory, systemd will expand that for us.
[Unit] Description=Westwoods Eco Wants=network-online.target After=syslog.target network.target nss-lookup.target network-online.target [Service] Restart=on-failure RestartSec=5 StartLimitInterval=60s User=eco Group=eco LimitNOFILE=100000 WorkingDirectory=/gameservers/eco ExecStartPre=/usr/games/steamcmd +login anonymous +force_install_dir /gamesservers/eco +app_update 739590 default validate +quit ExecStart=/gamesservers/eco/EcoServer ExecReload=kill -TERM $MAINPID ExecStop=kill -TERM $MAINPID [Install] WantedBy=multi-user.target
Stopping the Server[edit | edit source]
To safely shut down the Eco server, send SIGTERM (saves world), SIGINT (immediate stop! does not save the world!) or press
Ctrl+C with the EcoServer process interactively to initiate a safe shutdown.
Please not that this procedure doesn't work with Eco versions prior to 9.0.0-beta.
Docker[edit | edit source]
There is a Docker version of the server as well. You can pull the latest stable version using:
docker pull strangeloopgames/eco-game-server:latest
You can also find additional builds here:
You will need to make sure that the Docker container is exposing the ports and map them to ports on the host that are open in the hosts firewall and router.
Troubleshooting[edit | edit source]
Missing GDI library[edit | edit source]
You may sometimes get a crash on an attempted initial startup with an error resembling the following:
Failed to load server, Exception was Exception: DllNotFoundException Message:Unable to load shared library 'libgdiplus' or one of its dependencies.
The solution to this error state is to simply install the missing library. On a Debian-derived host this can be done with:
sudo apt install libgdiplus
Connecting remotely[edit | edit source]
You may find that your server does not show up in a list for people outside of your local network, even if you have set "PublicServer": true and have opened the appropriate ports in your router (and firewall if enabled on your linux machine).
If this happens, try clicking on the "+" symbol in the "Your Worlds" area, then adding in the external IP and port you used (probably 3000). Unfortunately, https://www.yougetsignal.com/tools/open-ports/ does _not_ accurately reflect one's ability to connect to the server.